ComfortBilt HP61 pellet stove

Modern black pellet stove with a glass window showing a bright orange flame

The ComfortBilt HP61 Charcoal Pellet Stove is our best-value high-output pellet stove. It takes the performance and efficiency of our popular HP22 pellet stove and packages it in a more traditional looking cabinet, perfect for basement applications. With engineering and manufacturing quality you can see and feel, the HP61 gives homeowners all the heat they need at a price they can afford. The ComfortBilt HP61 Charcoal and Pellet Stove features:


  • Certified 50,000 BTU output will heat a 3,000 ft² or more if temperatures are mild
  • EPA and CSA Certified to comply with all federal emissions mandates
  • Heat exchanger design and powerful room blower produce maximum heat from pellets
  • Easy to clean heavy gauge exterior
  • 51 pound hopper capacity; ashes fall automatically into a large removable ash pan
  • Pellets burn so completely that the ash drawer only needs emptying every two weeks
  • Five power settings allow up to 19 hours of continuous burning on lowest setting
  • Programmable thermostat allows constant temperature and economical pellet use
  • Rear mounted 3” standard exhaust port, and 2” standard air intake 
  • Exterior dimensions of unit are 24” wide, 30” deep, and 35” high with mounted controller


The HP61 Pellet Stove Charcoal comes with a one-year limited warranty on parts and service.

Parts Available

Control Board

Green circuit board with black transformer, white connector, and blue capacitor on bubble wrap

Exhaust Fan

Metal star-shaped hub or wheel component on a circular silver plate, viewed from above.

Auger Motor

Black electric motor with attached gearbox and protruding metal shaft, with red and black wires.

Cast Burn Pot

Gray perforated metal basket with raised sides and rounded corners on a white background

Convection Fan

Black and silver wall-mounted paper towel dispenser with exposed roll and cover removed

Stainless Steel Burn Pot

Scuffed metal container with visible welds and a round fitting on the side

Gen 1 Replacement Igniter

Long-handled red-and-black tool with a gray connector on a white background

Vacuum Switch

Black round electronic component with mounting tabs and a white label on a white background

Gen 2 Replacement Igniter

Black-handled double-prong tool with a curved metal tip on a white surface

Gen 2 Igniter Bracket

Black ring clamp with a silver screw on a white background

Gen 3 Replacement Igniter

Black rectangular sensor with white connector and curved cable on a light background

Gen 3 Igniter Mounting Set

Two silver bolts, a red washer, and a translucent cylindrical spacer on a white background

Main Power Switch

Black IEC power inlet with an on/off rocker switch on a white background

Proof of Fire Switches

Two white ceramic electrical sockets with metal contacts on a white background

Vermiculite Set

Cork board with a small square cutout and two detached cork strips below

Hopper Lid Safety Switch

Small electrical microswitch with a metal lever arm, white body, and black actuator on a plain background

Control Panel

Black electronic control panel with LCD screen and arrow buttons on the right, plus power and function buttons on the left.

Remote Control Thermostat

Wireless remote control system with receiver box, handheld controller, and yellow batteries on white background

Parts Care Package

Orange “Parts Care Package” text over a gray oval with faint mechanical parts in the background

30LB Hopper Extension

Open black hinged box with 18